Although the network attached storage (NAS) are considered to be very reliable storage solution for homeowners and business owners alike, they are highly exposed to failure and outage, and when they do, it literally becomes impossible to access the data stored in them. The failure will basically differ depending on the implementation type, but basically, the device will fail as a result of the system crash or malfunction, power surge, security failure, control board failure or just simple human errors. And it is also hard to do NAS data recovery, we will discuss this issue in this article.
- Part 1. What is NAS Data Recovery
- Part 2. How to Perform NAS Data Recovery
- Part 3. The Best NAS Data Recovery Software for Mac and Windows
Part 1. What is NAS Data Recovery
NAS devices normally restrict access to the storage drives except for the one iSCSI protocols. These devices are more complex than the typical USB disk enclosures, and they usually do not function in the same manner. Therefore it becomes quite difficult to recover data if something does happen to them. The NAS data recovery is a process that will rescues and handle the data from a failed device, and move it to a safe and accessible location. While NAS can significantly increase the available data, the limitation of the hardware can make data recovery extremely difficult. But this doesn't mean it's impossible.
Part 2. How to Perform NAS Data Recovery
If your NAS Device has failed, then you will need to follow these steps:
Step 1. Get all the NAS disk out of the device
This might seem too obvious, but it's not. You will probably need to have a look at some of the video tutorial available to correctly get these disks out of NAS.
Step 2. After getting all the disk, connect them to the recovery PC
Any computer running Windows can be used. You can use the USB port, but SATA is a bit preferable unless your PC doesn't have enough ports for connection. For speed purposes, it would be better if you connect the disks to the motherboard.
Step 3. Pre-prepare the disk space
You need to prepare the space you are going to recover your data's too, but remember the storage space has to be equal to that on your NAS. Do not expect to get the data so quickly, since the analysis of the array will require read on all the devices. This can typically take even days, for the recovery to complete. Once you have made all the above preparation, you can use third-party NAS recovery software. Most of the software you will come across has some form of recovery capabilities; however, you need to be a little bit keen as many of them can overwrite the data you intend to recover.
Part 3. The Best NAS Data Recovery Software for Mac and Windows
Recoverit for Mac (or Recoverit for Windows) is one of the best NAS data recovery software you will come across; it's entirely different from the pack. It's a life saver when it comes to solving your data loss problems; you get your lost data safely, quickly and comprehensively. The software is compatible with Mac, and will typically recover everything from emails, images, music, to videos, to archive files. To simply put it, the software deeply scans the through the system and recovers everything you need. This software works effectively not just on NAS, but also on other external devices like USB flash drives, PC, notebook, memory cards and other external hard drives.
Why Choose This NAS Data Recovery Software:
- Deeply scans and recover any raw files, deleted, formatted or lost.
- Restores the lost files with the original names and folders on it.
- Supports Mac hard drives the USB drive and pretty any other external storage device.
- Supports all the popular file systems such as FAT16 and 32, HFS, NTFS as well as HFSX.
- Before recovery, you can preview the images, song, videos and archived files.
Step-by-Step Guide for NAS Data Recovery
Step 1. Install the NAS Data Recovery Software
You will need to download the Recoverit for Mac software, open the download folder, and run the setup file. This process should not take more than two minutes, but as soon as the process is through, insert the data recovery for Mac. You have more chance of more data recovery if you stop using the device as soon as files are lost or deleted.
Connect your device to your Mac before starting recovery. Now from the primary window if the software, please select the file types that you want to recover. Then click "Next".
Step 2. Select a Drive
You will need to choose a drive that you want to recover files from, then click on the "Start" icon on top to scan the file on the selected drive. If by any chance, you notice that the drive is not on the list, just click on the refresh icon and try again.
Step 3. Preview and Begin Recovery
This software will allow you to preview your lost file before recovery, but this will, of course, happen after a complete scan. You will have to use the preview feature, to see your lost data. If you remember the name of the missing file, use the filter by document, video, audio or image. If you accidentally emptied the file on the trash folder, just head on to the folder on the left and click it. Besides, the "Deep Scan" mode will help you recover much more files as it scans deep into your chosen drive.
To recover the files, it is important that you check the box before you hit the "Recover" button on top. In the pop-up window that will open, just choose the folder you need to save and click "OK" to begin the recovery process.